Buy Online
| Product Name | Ref No | Specification | Application |
|---|---|---|---|
Trimark HPF- N90 |
W071401 W071402 |
F7A2-EM12K |
Tri-Mark HPF-N90 and N90F are semi basic agglomerated fluxes producing weld deposits with good mechanical properties at low temperatures. HPF-N90 and N90F have excellent weldability, easy slag removal in deep grooves, good resistance to cracking and porosity and excellent bead appearance. HPF-N90 and N90F flux can be used on multi-pass applications on unlimited thickness, with very little change in the chemical composititon of the weld metal. |
| Trimark HPF-A72 | W071403 | F7A0-EM12K | Tri-Mark HPF-A72 is an agglomerated Active fluxe with Mn and Si aditions. HPF-A72 is a versatile flux with excellent weldability and easy slag removal; it is highly resistante to cracks and porosity and has a very good bead appearance. HPF-A72 is ideal for one sided welding, double sided welding, square edge joints, fillit welds and lap welds in structural and general engineering applications. It is recommended for welding inside grooves but is limited to material thicknesses below 25mm. Due to the high oxidization potential, it does not require any special base metal preparation and cleaning prior to welding. |
| McKay MK-N | W071406 | N/A | McKay MK-N is totally neutral agglomerated flux, designed for welding with solid and tubular wires of the 400 series stainless steels. It can also be used with low alloy steel wires. It features clean slag removal with wires containing Nb and V, excellent recovery of the alloying elements from the tubular wires, such as Cr, Ni, Mo, Nb and V and accepts welding with twin-arc and oscillating technique, with currents up to 1000A. McKay MK-N flux should be used with wires containing at least 0.20% Si, in order to avoid porosity. |
| Trimark HPF-N11X | W071405 | F7A4-EM12K F7P0-EB2-B2 F7A4-EM12K F7P0-EB2-B2 | Tri-Mark HPF-N11X is an agglomerated flux for submerged arc welding, it is a basic neutral type and gives excellent mechanical properties at low temperatures. Due to its neutrality, HPF-N11X can be used for multi pass welding with unlimited thickness with very little change in the chemical composition of the weld metal. Even though it gives excellent properties at low temperature with EM12K wire, it also gives excellent results when welded with low alloy steel wires such as Cr-Mo, EB-2, EB-3, Mn-Mo, EA2 and EA3. It is ideal for welding procedures that require impact values at – 40oC. |
Visit the Afrox online store for more information and safe and secure shopping.