Buy Online
| Product Name | Dia mm | Ref No | Specification (*Nearest pecification) | Hardness H Rc |
Application |
|---|---|---|---|---|---|
| Tube Alloy Buildup-O | 1.2 1.6 2.8 | W077092 W077096 W077098 | DIN 8555 MF1-GF-300-P |
30-34 | Good impact resistance with mild abrasion for rebuilding worn parts |
| Tube Alloy AP-O | 1.6 1.6 2.8 | W077072 W077068 W077069 | DIN 8555 MF8-GF-200/55KP |
18-20 As welded 50-55 Work Hardened |
Used in joining austenitic manganese steels to themselves, carbon steels and alloy steels. Also on Bucket teeth and lips, crusher jaws and cones, grizzly bars and fingers, hammer mills, hydroelectric turbines, impactor crusher bars, muller tyres, sizing screens and interparticle crushers. |
| Corewear 34-O | 2.0 2.4 2.8 2.8 | W077080 W077081 W077082 W077083 | DIN 8555 MF1-GF-300-P |
23-36 | Good impact resistance with mild abrasion for rebuilding worn parts |
| Tube Alloy 242-O | 1.2 1.6 2.8 | W077102 W077106 W077108 | DIN 8555 MF1-GF-40-GP |
36-42 | Good metal to metal abrasion resistance with mild to moderate impact resistance. |
| Corewear 41-O | 2.4 2.4 2.8 2.8 | W077304 W077305 W077308 W077309 | DIN 8555 MF1-GF-40-GP | 39-43 | Good metal to metal abrasion resistance with mild to moderate impact resistance. |
| Corewear 56-O | 2.4 2.4 2.8 | W077314 W077315 W077319 | DIN 8555 MF6-GF-55-G | 50-59 | Excellent abrasion resistance and moderate impact resistance. Will work harden by about 3 degrees. |
| Tube-Alloy 258-O | 1.2 1.6 2.8 | W077077 W077078 W077079 | DIN 8555 MF6-GF-55-G |
49-57 | H-12 type tool steel deposit which offers excellent metal to metal wear. It also has good resistance to abrasion and impact. |
| Tube Alloy 240-O | 1.2 1.6 2.8 | W077112 W077116 W077118 | DIN 8555 MF10-GF-50-G* |
40-52 | Chrome carbide deposit with good abrasion and impact resistance. Will work harden 5-10 degrees |
| Tube Alloy A43-O | 1.6 2.8 | W077126 W077128 | DIN 8555 MF10-GF-60-G* |
60-64 | Primary chromium carbides with fine niobium carbides in the matrix. Excellent abrasion resistance with moderate impact. Two layers max. |
| Tube Alloy 255-O | 1.6 2.8 | W077074 W077075 | DIN 8555 MF6-GF-60-G | 54-58 | Hi Chrome content gives large chrome carbides and excellent abrasion rsistance with moderate impact. Two layers max |
| Tube Alloy A45-O | 1.6 2.8 | W077146 W077148 | DIN 8555 MF10-GF-65-G* | 60-64 | Complex carbides which retain their hardness at elevated temperatures. Resistant to extreme abrasive wear even at high temperature. Two layers max |
| Tube Alloy 258Tic-O | 1.6 2.8 | W077136 W077138 | DIN 8555 MF10-GF-60-G* | 48-60 | Martensitic alloy with finely dispersed Ti carbides which is resistant to high stress abrasive wear |
| Duracor 59 OA | 2.8 2.8 | W071728 W071729 | DIN 8555 MF10-GW-55-GP | 54-60 | Large chromium carbides in an austenitic matrix. Excellent abrasion resistance with moderate impact. 2-3 layers should be used for optimum results |
| Duracor CR70T3 | 2.8 | W071648 | DIN 8555 MF10-GW-55-GP* |
50-60 | A FCW version of CR70 depositing chrome carbides for high abrasion resistance and moderate impact. Two layers max. |
| Ranomatic D | 1.6 | W077066 | DIN 8555 MF10-GF-65-G* |
62-64 | A chromium boron alloy for parts subject to severe abrasion, moderate impact and high compressive loads. Two layers max. |
| Durmat NiFd | 2.4 | W077065 | DIN 8555 MF21-GF-55-CGTZ |
54-56 Matrix Carbides 2400 HV |
A Ni, Si, Cr, B matrix with 62% fused tungsten carbides for very extreme abrasion low impact |
Visit the Afrox online store for more information and safe and secure shopping.